• CRC Wad Cap Machine
• Syringe Assembly Machine
• Drip Chamber Assembly
• Scalp Vein Assembly Mc
• IV wing Assembly Mc
• High Speed Tube Cutting Mc
• Tip Forming / Flaring Mc
• Hub Needle Assmb. MC
• Flash Cap Ass. Machine

CRC Inner Cap & Wad Cap Insertion Machine - HA Model

HA Parts Feeder for Barrels , HA Parts Feeder for Cap With Needle 
HA Parts Feeder for Gaskets , HA Parts Feeder for Plunger

7,000 pcs ~ 8,500 pcs(multi-use) , ..13,000 pcs ~ 18,000 pcs (mono-use) , Air Consumption : 7 kg/?, 600 L/MIN, Electric Power : AC220V Electric Power Consumption : 1 kw , Machine Dimension : 800(W)x1300(D)x1200(H) mmx1500 kg, System

Our organization is counted among the most distinguished manufacturers and suppliers of Automatic Needle Assembly Machine

• Pick & Place Equipment
• Assembly Line Automation
• Robotic Based Applications
• Ultra Sonic Cleaning Machine
• Vision Camera inspection Machine
• Fixtures, Dies

Production Capacity: 1320 - 1500 pcs per hour
Delivery Time: 15 -16 weeks

The machines offered by us are designed and fabricated under the supervision of professionals. Assembled needles are unloaded automatically on the stands and the output of machine is approx 1400 pcs per hour with approx 99% needle orientation along with plus/minus 0. 1 mm length variation (which is very precise needle length)

PLC & sensors Mitsubishi, omron and hmi pro face/delta.
Out put of the machine is between 22~25 pcs. Per minute or 1320 ~1500 pcs per hour
Pneumatics used in this machine are festo/smc
Needle orientation approx 99%
For long life of grippers, we are using indian/custom make
Length variation plus/minus approx 0.1 mm

Owing to the sophisticated manufacturing facility, we have been able to offer Automatic Luer Lock and Flash Back Chamber Assembly Machine. The offered machines are fabricated under the strict surveillance of our professionals in accordance with the international standards. These machines are widely used to assemble two parts (luer lock & flash back chamber). Moreover, our offered machines have two tracks as well as four tracks in order to meet the requirements of customers. Both parts are assembled with help of pick & place unit and discharged through chute. Further, our machines have the capability of gives output from 4,500 pcs. to 9,000 pcs. per hour depending upon the nos. of tracks.

• Weather Shed Assmb. Machine
• Glass Coating Machine
• Capacitor Cold Pressing Machine
• Bi-Metal Tapping Machine
• U-Clamp Machine
• Riveting Machine

Production Capacity: The Output of the 2 Tracks Machine is 4500 Pieces Per Hour and the Output of the 4 Tracks Machine.

Machine frame size 850* 1250 * 800 mm

Innovation is our forte and we strive to design and develop Body Assembly Machine. These are designed on two tracks and double station and two stations are fixed on one table. Further. three components are assembled at our machines such as slip ring, cup formed teflon & wing housing/body. Cutting at wing assembly is clear and straight in length then the customers get very good tipping quality subject to the die quality.

PLC Of Mitsubishi, Keyence, Omron, Delta make
Output of single station is between 600~650 pieces per hour/station. It means 1200~1300 pcs per hour
MS Plate with Electro Less Plating (Very Long Life) machine table size 700* 650 * 800 mm
Maximum length variation plus/minus 0.3mm
Power consumption 0.25 Kw
Pneumatics used FESTO/SMC/CKD Make
Air consumption 3.0 cfm at 6.0 bars
Required manpower is 02
Output: Approx 600~650 pieces per hour/station that means 1200~1300 pieces per hour

We are engaged in manufacturing wide range of Tip Forming Machine. These are developed using high grade machines and equipment following the set industry standards and quality norms. These are widely acclaimed in the market for their low maintenance, easy installation, high performance and durability.

• Syringe Assembly Machine
• Drip Chamber Assembly
• Scalp Vein Assembly Mc
• IV wing Assembly Mc
• High Speed Tube Cutting Mc
• Tip Forming / Flaring Mc
• Hub Needle Assmb. MC
• Flash Cap Ass. Machine

Owing to the hard work of our professionals, we are capable of offering Automatic Silicon Tube Cutting Machine. These are designed with utmost perfection by our engineers using advanced machines and equipment. Our raw material for the product are sourced from some of the most reliable vendors in the industry. The machine is very compact with a table top design and comprises a output capacity of 4000 to 4200 pieces per hour.

Fully Automatic
25 watt variable speed geared motor
Cutting Length as per Clients requirements, otherwise 9 mm ± 0.2mm

Production Capacity: 4000 -4200 pcs per hour